SPI communication issues with Raspbian “Jessie”

Now that we are in the middle of autumn in Germany, and the daylight gets less and less, I decided to re-activate this little project of mine.

First thing was to update my Raspberry Pi (1) to Raspbian “Jessie”.

First check of my CC1101 Socket Driver Stack – and: Of course, it did not work.

Reason was that with Raspbian “Jessie” the way to enable the SPI kernel driver has changed. You can enable it using the “Advanced options” in the “raspi-config” configuration tool. Check out the description here: http://www.raspberrypi-spy.co.uk/2014/08/enabling-the-spi-interface-on-the-raspberry-pi/

Okay, after a reboot

  • lsmod shows the SPI kernel driver spi_bcm2835
  • The device files /dev/spidev0.0 and /dev/spidev0.1 exist

After that, the CC1101 Socket Driver Stack still did not work. Nothing was received over the air. Doing some analysis revealed that the ioctl calls responsible for the SPI data transfers between RPi and CC1101 failed.

Reason was that Raspbian “Jessie” uses a newer kernel than “Wheezy” and that the main ioctl message structure got a new field named “pad”

After I did take some more care to initialize this message structure in the code, everything worked will again.

And now the bad new: When analyzing the issue, I also killed my cross-compile installation  on Mac OS. It still does not work until now 😦

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s